Showing posts with label Citroen. Show all posts
Showing posts with label Citroen. Show all posts

Monday, February 22, 2010

Citroen 2CV 6 Charleston

Citroen 2CV 6 Charleston

The Citroën 2CV (French: deux chevaux, literally "two horses", from the tax horsepower rating) was an economy car produced by the French automaker Citroën from 1948 to 1990.
The 2CV belongs to a very short list of vehicles introduced right after World War II that remained relevant and competitive for many decades - in the case of the 2CV, 42 years.

Pierre-Jules Boulanger's early 1930s design brief - said by some to be astonishingly radical for the time - was for a low-priced, rugged "umbrella on four wheels" that would enable two peasants to drive 100 kg of farm goods to market at 60 km/h, in clogs and across muddy unpaved roads if necessary. France at that time had a very large rural population, who had not yet adopted the automobile due to cost. The car would use no more than 3 litres of gasoline to travel 100 km. Most famously, it would be able to drive across a ploughed field without breaking the eggs it was carrying. Boulanger later also had the roof raised to allow him to drive while wearing a hat.

André Lefèbvre was the engineer in charge of the TPV (Très Petite Voiture - "Very Small Car") project. By 1939, the TPV was deemed ready and several prototypes had been built. Those prototypes made use of aluminium or magnesium parts and had water-cooled engines. The seats were hammocks suspended from the roof by wires.

During the German occupation of France during World War II, Michelin (Citroën's main shareholder) and Citroën managers decided to hide the TPV project from the Nazis, fearing some military application. Several TPVs were buried at secret locations, one was disguised as a pickup, and the others were destroyed, and Boulanger had the next six years to think about more improvements. Until 1994, when three TPVs were discovered in a barn, it was believed that only two prototypes had survived. As of 2003, five TPVs are known. For long it was believed that the project was so well hidden that the all the prototypes were lost at the end of the war (in fact it seems that none of the hidden TPVs was lost after the War, but in the 1950s an internal memo ordered them to be scrapped. The surviving TPVs were, in fact, hidden from the top management by some workers who were sensitive to their historical value).

After the war, internal reports at Citroën showed that producing the TPV would not be economically viable, given the rising cost of aluminium in the post-war economy. A decision was made to replace most of the aluminium parts with steel parts. Other changes were made, the most notable being an air-cooled engine, new seats and a restyling of the body by Flaminio Bertoni. It took three years for Citroën to rework the TPV and the car was nicknamed "Toujours Pas Vue" (Still Not Seen) by the press.
Citroën finally unveiled the car at the Paris Salon in 1948. The car on display was nearly identical to the type A version that would be sold next year, but lacked an electric starter: the addition of this one was decided the day before the opening of the Salon of Paris. It was enormously criticized. In spite of that, it had a great impact on low-income population.

It was laughed at by journalists, probably because Citroën had launched the car without any press advertising. Boris Vian described the car as an "aberration roulante" (rolling aberration) and the car was qualified as a "Spartan car" or a "sardine can" by many. History has confirmed that the car was charming in a lot of people's views, and a revolution in consumer transportation, at least on the French market.

The 2CV was a great commercial success: within months of it going on sale, there was a three-year waiting list. The waiting list was soon increased to five years. At that time a second-hand 2CV was more expensive than a new one because the buyer did not have to wait. Production was increased from four units per day in 1949 to 400 units per day in 1950. Some of the early models were built at Citroën's plant in Slough, England but the 2CV sold poorly in Great Britain in part due to its excessive cost. Expecting to boost sales, Citroën introduced a glass-fibre coupé version called the Bijou that was briefly produced at Slough. Styling of this little car was by Peter Kirwan-Taylor who was better known for his work with Colin Chapman of Lotus cars, but it proved to be too heavy for the diminutive engine to endow it with adequate performance.

In 1967 Citroën built a new car based on the 2CV, the Citroën Dyane, in response to the direct competition by the Renault 4. At the same time, Citroën developed the Méhari off-roader.

A rare Jeep-esque derivative, called the Yagán, after an Aborigine tribe, was made in Chile between 1972 and 1973. After the Chilean coup of 1973, there were 200 Yagáns left that were used by the Army to patrol the streets and the Peruvian border, with 106 mm cannons.
A similar car was sold in some west African countries as the Citroën "Baby-brousse".
A very special version of the 2CV was the «Sahara» for very difficult off-road driving, built from December 1960 to 1971. This one had an extra engine mounted in the rear compartment and both front and rear wheel traction. Only 694 «Sahara»s were built.
The purchase price of the 2CV was always very low. In Germany in the 1960s for example, it cost about half as much as a Volkswagen Beetle.

As time went on, this rural horse-substitute gained favor with a new audience: European nonconformists who protested mass consumer culture. At the time, a popular joke was that 2CVs came straight from the factory with Atomic Power - No Thanks! bumperstickers. Owning a 2CV was like being in a club - 2CV owners would wave to each other on the road.

The 2CV was mainly sold in France and some European markets. In the post war years, Citroën was very focused on the home market, which had some unusual quirks, like puissance fiscale. The management of Michelin was indulgent of Citroën up to a point, but was not prepared to initiate the investment needed for the 2CV (or the Citroën DS for that matter) to truly compete on the global stage. Consequently, the 2CV suffered a similar fate to the Morris Minor and Mini, selling fewer than 10 million

In Iran, the Citroën 2CV was called the Jian. The cars were originally manufactured in Iran in a joint venture between Citroën and Iran National up until the 1979 Revolution, when Iran National was nationalized, which continued producing the Jian without the involvement of Citroën.
Only a few thousand 2CVs were sold in North America when they were new - the car was so small and inexpensive that the cost of transport alone put it into a different and uneconomic price category. The 2CV was built in Chile and Argentina to address this issue for South America.

The Construction
The level of technology in the 1948 2CV was remarkable for a car of any price in that era, let alone one of the cheapest cars on the planet. While colors and detail specifications were modified in the ensuing 42 years, the biggest mechanical change was the addition of front disc brakes in 1981 for the 1982 model year.

The 1948 2CV featured:
= four wheel independent suspension that was inter-connected front to rear on the same side under certain conditions
= leading arm front suspension
= trailing arm rear suspension
= rear fender skirts
= front-wheel drive
= inboard front brakes
= small, lightweight, air-cooled flat twin engine
= 4-speed manual transmission
= bolt-on detachable body panels
= front suicide doors
= detachable full length fabric sunroof and boot lid — for load carrying versatility

The body was constructed of a dual H-frame chassis, an airplane-style tube framework, and a very thin steel shell.
The suspension of the 2CV was almost comically soft — a person could easily rock the car back and forth dramatically. The leading arm / trailing arm swinging arm, fore-aft linked suspension system together with inboard front brakes had a much smaller unsprung weight than existing coil spring or leaf designs. The interconnection transmitted some of the force deflecting a front wheel up over a bump, to push the rear wheel down on the same side. When the rear wheel met that bump a moment later, it did the same in reverse, keeping the car level front to rear. This made the suspension more responsive, enabling the 2CV to indeed be driven at speed over a ploughed field. Since the rear brakes were outboard, extra shock absorbers or tuned mass dampers were fitted to the rear wheels to damp wheel bounce.

Front-wheel drive made the car easy and safe to drive and Citroën had developed some experience with it due to the pioneering Traction Avant.
It was powered by a flat-twin air-cooled engine designed by Walter Becchia, with a nod to the classic 'boxer' BMW motorcycle engine (it is reported that Becchia dismantled the engine of the BMW motorcycle of Flaminio Bertoni before designing the 2CV engine).

The car had a 4-speed manual transmission, an advanced feature on an inexpensive car at the time. Boulanger had originally insisted on no more than 3 gears, because he believed that with four ratios the car would be perceived as complex to drive by customers. Thus, the fourth gear was marketed as an overdrive, this is why on the early cars the "4" was replaced by "S" for surmultipliée. The gear shifter came horizontally out of the dashboard with the handle curved upwards. It had a strange shift pattern. The first was back on the left, the second and third were inline and the fourth (or the S) could be engaged only by turning the lever to the right from the third.
In keeping with the ultra-utilitarian (and rural) design brief, the canvas roof could be rolled completely open. The Type A one stoplight, and was available only in grey. The windscreen wipers were powered by a purely mechanical system: a cable connected to the transmission, to reduce cost, this cable powered also the speedometer. The wipers' speed was therefore variable with car speed. When the car was waiting at a crossroad, the wipers were not powered, thus it was also possible to power them by hand.

The reliability of the car was increased by the fact that, being air-cooled, it had no coolant, radiator, water pump or thermostat. It had no distributor either because both spark plugs were fired at the same time, on every two strokes. Except for the brakes there were no hydraulic parts on original models as the shock absorbers were based on an inertial system.

The Engines
The car featured an air-cooled, flat-twin, four-stroke, 375 cc engine, with the notoriously underpowered earliest model developing only 9 bhp DIN (6.5 kW). A 425 cc engine was introduced in 1955, followed by a 602 cc (giving 28 bhp (20.5 kW) at 7000 rpm) in 1968. With the 602 cc engine the tax classification of the car changed so that it became in fact a 3CV, but the commercial name remained unchanged. A 435 cc engine was introduced at the same time in replacement of the 425 cc, the 435 cc engine car was christened 2CV 4 while the 602 cc took the name 2CV 6 (nevertheless it did take the name 3CV in Argentina). The 602 cc engine evolved to 33 bhp (24 kW) in 1970; this was the most powerful engine fitted to the 2CV. A new 602 cc giving only 29 bhp (21.5 kW) at a slower 5750 rpm was introduced in 1979. Despite being less powerful, this engine was more efficient, allowing lower fuel consumption and better top speed, at the price of decreased acceleration.

The 2cv also pioneered the use of the now common Wasted spark Ignition System, also known as the DIS (Distributorless Ignition System) ignition using a double ended coil fired on each revolution, (on the exhaust and compression stroke), by just a contact breaker.
When asked about the 2CVs performance and acceleration, many owners said it went "from 0-60 in one day". Others jokingly said they "had to make an appointment to merge onto an interstate highway system"
The last evolution of the 2CV engine was the Citroën Visa flat-2, a 652 cc featuring an electronic ignition. Citroën never sold this engine in the 2CV, however some enthusiasts have converted their 2CVs to 652 engines.


The 2CV was produced for 42 years, the model finally succumbing to customer demands for speed and safety, areas in which this ancient design had fallen significantly behind modern cars.
Citroën had attempted to replace the ultra-utilitarian 2CV several times (with the Dyane, Visa, and the AX), however its comically antiquated appearance became an advantage to the car and it became a niche product which sold because it was different from anything else on sale.

While not a replacement for the 2CV, a straightforward, unremarkable urban runabout supermini like the Citroën AX seemed to address the automaker's requirements at the entry level in the 1990s.
In 1988, production ceased in France but was continued in Portugal. The last 2CV, gray with chassis number VF7AZKA00LA376002, rolled off the Portuguese production line on July 27, 1990. In all, a total of 3,872,583 2CV sedans were produced. Including the commercial versions of the 2CV, Dyane, Méhari, FAF, & Ami variants, the 2CV's underpinnings spawned over nine million cars.
The 2CV was outlived by contemporaries such as the Mini (went out of production in 2000), VW Beetle (2003), Renault 4 (1994), VW Type 2 (still in production) and Hindustan Ambassador (still in production).

Citroen C3 Pluriel Charleston

Citroen C3 Pluriel Charleston



In 2009, Citroën has released first details of a special edition of its funky convertible supermini, the Citroën C3 Pluriel Charleston.

The Citroën C3 Pluriel Charleston fashions a contemporary reinterpretation of a design theme that once decorated the famous Citroën 2CV 6 Charleston - a stylistic nod to one of the most iconic cars in history, which this year celebrates its 60th birthday.


With a blend of nostalgic and contemporary styling the Citroën C3 Pluriel Charleston should strike a chord with both 2CV fans and buyers looking for a vehicle with individual design flair. With its bold two-tone colour scheme of black and Bordeaux red, the sophisticated Citroën C3 Pluriel Charleston special edition will be positioned at the high-end of the Citroen C3 Pluriel range with premium touches throughout such as gloss-black fittings, leather upholstery and chrome trim. Also fitted as standard are stylish 15” aluminium wheels which feature red embellisher centres that add elegance and definition.

Citroen C-Cactus Concept

Citroen C-Cactus Concept


Citroën is unveiling C-Cactus at the 2007 Frankfurt Motor Show. This ingenious concept is a new take on vehicle design, centered on essential values. The Marque's ambitious aim is to market an ecological hatchback with cheerful, attractive styling, equipped with a hybrid HDi drivetrain and sold at the same price as an entry-level C4.
To square this complex equation, Citroën is exploring new forms of design. It has decided to abandon features that are not essential to comfort and to focus instead on technology, styling and equipment that are positive, ecological and valued by users.

The Essential, intelligent and ecologically aware
C-Cactus is an ecological car. It includes a significant proportion of recycled or recyclable materials and, like the plant it is named after, it is low on consumption. Weighing just 1,306 kg and featuring a hybrid HDi drivetrain, C-Cactus consumes 3.4 l/100 km for CO2 emissions of 78 g/km.

At the same time, C-Cactus is no more expensive than a mid-range family car. Its low production cost can be attributed to the use of new materials and to a rational design process using a smaller number of parts. The cabin is made up of just over 200 parts, i.e. almost half the number used by a conventional hatchback of identical size.

An attractive and modern vehicle
C-Cactus is an essential car, with sharp styling and attractive features. Its curves give it a fun look and strong appeal, while the angles and rounded lines of the bodywork underline its dynamic character.
C-Cactus sets high standards of onboard comfort with a roomy interior that is worthy of a family car. It is 4.2 metres long and 1.8 metres wide with a wide range of equipment including air conditioning with automatic temperature control, a high-quality audio system, a panoramic glass sunroof, cruise control and a speed limiter.
The economic and ingenious solutions adopted for C-Cactus keep production costs down and make it possible to fit a diesel hybrid drivetrain, all for the price of an entry-level C4. To achieve this result, C-Cactus places the emphasis on equipment that is essential to passenger comfort. At the same time, it explores new design processes in order to show that economy and ecology need not be synonymous with a rough ride.

New avenues in design
C-Cactus is the result of an intelligent design process pursuing new objectives. By exploring new forms of expression and new technical solutions, Citroën's engineers cut the number of parts required to build the car.

To achieve this objective, the engineers:
* simplified a number of parts and mechanisms to the extreme,
* grouped several functions in a single part,
* removed all parts that are non-essential to the running of the car or to the comfort and well-being of its occupants.

The dashboard has gone, and its usual functions are now grouped on the central console and the fixed hub of the steering wheel. The central console thus includes the active loudspeakers, gearbox controls and tactile screen giving access to the onboard computer, navigation system and air conditioning controls. The controls for the indicators, lights, wipers, horn and cruise control/speed limiter are on the fixed hub of the steering wheel, as are the tachometer and lights for the indicators, headlamps and warning signals.
Another example of simplification: the part used for the front bumper, which includes the headlamps and chevrons is the same as the part making up the lower part of the tailgate at the rear. This contributes to the assertive design of C-Cactus while bringing economies of scale in production.

This simplicity is also reflected in the design of the front end, which comprises just two parts: a fixed bonnet comprising the front wings, and a flap giving access to the vehicle maintenance functions (oil, windscreen washer, etc.).
Reflecting a similar approach, using the air conditioning makes it virtually unnecessary to open the windows. A simple sliding mechanism is therefore provided, since this is sufficient in normal use. Engineers were thus able to get rid of both the window frames and the opening mechanism.
At the same time, a number of monoblock units are used for C-Cactus to reduce the overall number of parts. The door panels, for example, are made of two parts, compared with twelve in a conventional hatchback. The seats also comprise two parts: a highly comfortable, moulded, coloured, integral-skin foam part for the seat, and a solid monoblock frame to hold the foam in place and fix the seat to the floor rails. The ergonomics are excellent and - here again - the number of components is limited.

The Advanced ecological features
To achieve real environmental impact, Citroën's objective has always been to market technologies and vehicles that are affordable to the greatest number. The objective with C-Cactus is to go one step further, by bringing out a car whose hybrid HDi drivetrain makes it truly ecological car, but that can be sold at the same price as an entry-level family car.
With its diesel hybrid drivetrain combining a 70 bhp DIN HDi diesel engine with a particulate filter and an electric motor providing additional power of 30 bhp DIN, C Cactus consumes just 3.4l/100 km with CO2 emission levels of 78 g/km over a combined cycle. In urban use, ZEV (Zero Emission Vehicle) mode provides silent, all-electric operation. On journeys involving successive acceleration and deceleration, the hybrid system limits fuel consumption by using both types of energy.
Other points also help to make C-Cactus a car that respects the environment.
The solutions adopted for the design of C-Cactus also contribute to bringing down fuel consumption and CO2 emissions.
Using fewer parts makes the vehicle 15% lighter than a C4 Hybride HDi for a total weight of 1,306 kg.
The tyre width has also been kept down (205/45 R21) on C-Cactus, which adds to environmental performance.

Fewer parts also means smaller quantities of raw materials. In addition, a significant part of the materials used are recycled or recyclable. The windscreen and windows, for example, are made of recyclable glass. The tyres are also recyclable, as is the crude steel used for the door panels. This metal is unpainted and unvarnished but has been treated for corrosion.
The protective mats are made of recycled leather, taken from leather cut-offs that cannot be used by conventional tanneries. Many parts are made of cork, a natural material made from the bark of oak trees. The felt used for the door panels and fascia stowage compartments is made from wool. This material uses no chemical additives and is both recyclable and biodegradable.
The top speed of C-Cactus has deliberately been capped at 150 kph. This choice not only contributes to the car's good environmental performance, it also reflects Citroën's efforts to develop a green vehicle illustrating a new approach to the car, in which the motorist is in harmony with his/her surrounding environment.

Based on the bold but rational use of parts and materials, C-Cactus is an essential vehicle reflecting a new vision of the car focused on:
* a new balance of priorities, and a design that pursues the essential without sacrificing comfort,
* a design in which ecology and economy are synonymous not with dullness, but with expression and pleasure.

Through this attractive concept with its appealing offbeat styling, Citroën has developed a new take on the economical and ecological car. A vehicle at ease with its original and ingenious design. At the same time, this is a car that brings the occupants all the features essential for their comfort.

Looking for simplicity: intelligent, fun exterior design
C-Cactus has a unique personality: appealing, modern and offbeat, with its simple shapes and mix of round, curving lines. The original styling also reflects ingenious design choices. Throughout the design process, the focus was very much on simplicity. This led to the development of ingenious solutions that contribute to the attractive offbeat design of C-Cactus.

At the front, the headlamps of C-Cactus give the vehicle an appealing air with their rounded and slightly angular forms. They are underlined by two cylindrical air intakes cut out of the bumper, above an air intake grille of modern design which, while contributing to the vehicle's rounded forms, also adds a muscular energetic touch. The raised bonnet and two air intakes also contribute to the dynamic looks of C Cactus.
The vehicle's rounded forms are reflected in its profile. The dynamic design lines are accentuated by the forward flowing roof line and the asymmetric doors made of crude steel that has been treated for corrosion.
The doors feature an original cut-out since the fixed windows remove a number of the constraints that usually apply to design. Shaped to provide easy access to the interior, they give C-Cactus a curving, sleekly muscled appearance. The use of crude steel treated for corrosion, but without paint or varnish, contributes to savings in production costs while giving a strong, contemporary look.

The high waistline and 21-inch wheels also underline the strong character of C Cactus. The wheels were the focus of particular attention. Large-diameter wheels and low-profile tyres have become key styling features in vehicles of strong, contemporary design. Citroën worked with Michelin on the development of low-profile tyres with a large diameter and limited width. The low ground friction area limits fuel consumption and, at the same time, tyre production costs are kept under control since the manufacturing process requires only a small amount of rubber. For new and even more original styling, these specially designed tyres feature a green pattern on a white background printed inside a wide groove spanning the entire tread.
The same styling codes can be seen at the rear, where a combination of curves and taut lines illustrate the car's dynamic and appealing personality. The chevrons identify this car as a Citroën. The name "Cactus" appears in relief on the bottom of the tailgate, in a young, smooth, modern printface. The rear lights, which resemble the headlamps in shape, boast an innovative feature: cut-outs in the interior plastic that let the driver see through. This innovation considerably increases the driver's field of vision and may be particularly useful in manoeuvres, for example.

Fewer features for greater impact: a welcoming, attractive and cleverly designed interior
C-Cactus is also an original and ingenious car on the inside. The design cut-outs, choice of materials, patterns and colours give the cabin a minimalist, attractive and airy look.
The cabin materials reflect innovative choices. Their quality is immediately visible. Looking beyond their appearance, they are also economical and ecological. For example, cork is used for many decorative parts, as well as for the air vents and air conditioning panel. The floor features a pattern in recycled leather. The white lacquer finish of some parts and the visual effects created by the materials used contribute to the original design and perceived quality of the cabin.

Another key idea was to enhance the offbeat styling of C-Cactus by reducing the number of parts and the quantity of materials used for the decor.
Non-essential parts, such as the dashboard, are absent, while some of the parts that are usually hidden have been included in the decor. This is the case, for example, of the steering column, air conditioning ducts and the grid for fore-and-aft adjustment of the front seats. These features add a modern and original touch to the cabin. The refill for the scented air freshener is also visible. It contributes to the attractive appearance of the cabin, while enabling the driver to see how much is left.

The decor has not been put in. It has been created by removing material. This idea of decorating "in a vacuum" is reflected in the patterns present on the door panels and seat frames. The patterns cut-out in the door panels show the apple green felt inserted between panel and metal. The main role of this part is to soundproof the vehicle, but its colour and cut-outs make it an integral part of the décor. The same flower, plant and butterfly patterns - symbolising the environment, purity and well-being - are also found on several other cabin features. They are cut out, for example, in the white lacquer seat frame. These cut-outs show the coloured foam used for the seat cushions and give it a decorative quality.

Pertinent choices for an easy and enjoyable ride
C-Cactus boasts advanced equipment, optimised on-board space and modular design at an affordable price. Passengers have all the comfort essential to their well-being.
First, the ignition key of C-Cactus is a portable MP3 player with a touch screen. When it is plugged into the fixed hub of the steering wheel, it is recognised by the vehicle which can then be started. The fixed-hub steering wheel includes a wide variety of functions. In addition to the usual controls, it also includes the speedometer, which is of an unusual design. The figures, placed in relief around the hub, rotate according to speed and are positioned with respect to a fixed point.

A second touch screen on the central console includes a navigation system to guide the driver on the road. It also serves as an onboard computer. This equipment endows C-Cactus with high-tech advanced features while also keeping costs down, since functions are grouped together.
The central console features two powerful high-quality active loudspeakers that provide C-Cactus with an excellent sound system. Their ingenious layout limits both wiring and installation costs.

Generous interior space ensures passenger comfort. C-Cactus boasts the dimensions of a family car (4.2 metres long and 1.8 metres wide) with a generous and modular boot (between 500 and 1,100 litres). The rear seat, placed on a rail, slides up against the front seats. The floor pan, which is integral with the rear bench, also slides forward to reveal a subfloor. This reveals a virtually flat surface area to load bulky objects.
Another ingenious feature is a clip-on bag on the passenger side. This replaces the glovebox and can be used to carry objects outside the car.
For comfort and styling, C-Cactus features a panoramic glass sunroof that lets the light flood into the cabin.

Citroen DS Inside Concept

Citroen DS ( Different Spirit ) Inside Concept


ith the Citroen DS Inside concept car Citroen is launching a new line of products to broaden its current range. The new line will consist of three new cars, positioned in the small, medium and large car segments.


The Citroen DS Inside concept car and vehicle line are characterised by forthright choices on styling, onroad performance and use. These are accessible objects of desire, cars that stand apart by their creativity, intelligent design and build quality, embodying the very best of Citroen. The new product line will perfectly illustrate Citroen's new spirit of "Créative Technologie".
The new line will also have a new naming system. Like the main range vehicles, which carry the letter C and a number, and, like the MPVs, which sport the Picasso signature, the new models will feature a special name: the DS line.

DS stood and continues to stand for a new approach to automobiles and the future. Citroen is taking inspiration from its design DNA to strengthen the positioning of its new product line. The range instills the different spirit, that the name DS inspires. Hence the distinctive model line up will be called DS3, DS4 and DS5. DS: Different Spirit.

Citroen DS 19

Citroen DS 19

The Citroën DS (also known as Déesse, or Goddess, after the punning initials in French) was an automobile produced by the French manufacturer Citroën between 1955 and 1975. Citroën sold nearly 1.5 million D-series during its 20 years of production.The DS is well-known for its futuristic, aerodynamic body design, and for its innovative technology (including its hydropneumatic self-leveling suspension system).

The DS advanced the achievable standards in terms of ride quality, roadholding, handling, and braking in an automobile. Automotive journalists of the time often noted that competitors took decades to adapt to the higher standards it set. The smooth, aerodynamic body lines gave the car a futuristic appearance. While it looked very unusual in 1955, public tastes appear to have caught up with the DS in the post-Ford Taurus/Audi 100 era.

Model history
After 18 years of development in secret as the successor to the venerable Traction Avant, the DS 19 was introduced on October 5, 1955 at the Paris Motor Show. The car's appearance and innovative engineering captured the imagination of the public and the automobile industry almost overnight. 743 orders were taken in the first 15 minutes of the show, and orders for the first day totalled 12,000.


The high price tag, however, hurt general sales in a country still recovering from World War II 10 years earlier, and a submodel, the ID (another pun: in French, Idée, or Idea), was introduced in 1957 to appeal to more cost-conscious buyers. The ID shared the same body with the DS, but had more traditional features under the hood. It had no power steering (though this was added as an option later), and instead of the hydraulically controlled manual transmission and clutch, it had a conventional clutch and transmission. Interestingly, the first model series was called 11D, a clear reminder of the last model of the Traction Avant, the 11C. A station wagon variant, the ID Break, was introduced in 1958.

Outside of France, the car's radical and cosmopolitan design appealed to non-conformists. A United States advertisement summarised this selling point: "It takes a special person to drive a special car".

Throughout its model lifetime, the DS managed to remain ahead of its time. It featured power disc brakes, a hydropneumatic suspension including an automatic levelling system and variable ground clearance, power steering and a semi-automatic transmission. A fiberglass roof reduced weight transfer. Inboard front brakes (as well as an independent suspension) reduced unsprung weight. Different front and rear track widths and tire sizes reduced the understeer typical of front-engined and front-wheel drive cars.

Despite the rather leisurely acceleration afforded by its small four-cylinder engine, the DS was successful in motorsports like rallying, where sustained speeds on poor surfaces are paramount.
The DS came in third in the 1999 Car of the Century competition, recognizing the the world's most influential auto designs. Winner and second place went to the Ford Model T and the Mini. It placed fifth on Automobile Magazine "100 Coolest Cars" listing in 2005.

History will remember the DS for many reasons, including the fact it was the first production car with front disc brakes.

Technical innovations

Hydraulic system
The hydraulic system of the DS 19 was a revolution. Previously hydraulics had been restricted to use in brakes and power steering; the DS used them for the suspension, clutch and transmission. The later ID19 had manual steering and a simplified power braking system.

Suspension
At a time when few passenger vehicles had caught up with the four-wheel independent suspension of the Traction Avant, the application of the hydraulic system to the car's suspension system to provide true self-levelling was a stunning move. This application - 'hydropneumatic suspension' - was pioneered the year before on the rear of the top of range Traction Avant 15CV-H.
At first it was often described as air/oil suspension, since both elements played a key role.

Each wheel was connected not to a spring, but to a hydraulic suspension unit consisting of:
= a sphere of about 12 cm in diameter containing pressurised nitrogen
= a cylinder containing hydraulic fluid screwed to the suspension sphere
= a piston inside the cylinder connected by levers to the suspension itself
= a damper valve between the piston and the sphere

A membrane in the sphere prevented the nitrogen from escaping. The motion of the wheels translated to a motion of the piston, which acted on the oil in the nitrogen cushion and provided the spring effect. The damper valve took place of the shock absorber in conventional suspensions.

The hydraulic cylinder was fed with hydraulic fluid from the main pressure reservoir via a height corrector, a valve controlled by the mid-position of the anti-roll bar connected to the axle. If the suspension was too low, the height corrector introduced high-pressure fluid. If it was too high, it released fluid back to the fluid reservoir. In this manner, it maintained a constant height. A control in the cabin allowed the driver to select one of five heights:
= normal riding height.
= two slightly higher riding heights, for poor terrain.
= two extreme positions for changing wheels.

The DS did not have a jack for lifting the car off the ground. Instead, the hydraulic system enabled wheel changes with the aid of a simple adjustable stand.

The source and reserve of pressure
The central part of the hydraulic system was the high pressure reservoir, which maintained a pressure of between 130 and 150 bar in two accumulators. These accumulators were very similar in construction to the suspension spheres. One was dedicated to the brakes, and the other ran the other hydraulic systems. Thus in case of a hydraulic failure (a surprisingly infrequent occurrence), the first indication would be that the steering became heavy, followed by the gearbox not working; only later would the brakes fail.

Hydraulic fluid
The original hydropneumatic system used a vegetable oil (LHV or liquide hydraulique végétale) similar to that used in other cars at the time. Very soon, Citroën changed to using a synthetic fluid (LHS or liquide hydraulique synthétique). Both of these had the disadvantage that they are hygroscopic, as is the case with most brake fluids. Disuse allows water to enter the hydraulic components causing deterioration and expensive maintenance work. The difficulty with hygroscopic hydraulic fluid was exacerbated in the DS/ID due to the extreme rise and fall in the fluid level in the reservoir, which went from nearly full to nearly empty when the suspension "got up" and the 6 accumulators in the system filled with fluid. With every "inhalation" of fresh moisture- (and dust-) laden air, the fluid absorbed more water. In August 1967, Citroën introduced a new mineral oil-based fluid LHM, or liquide hydraulique minérale. This fluid was much less aggressive on the system and it remains in use to the present day.

Briefly illegal in the United States (US federal law requires motor vehicle brake fluid to be red - an exception had to be granted to Citroën), LHM has since been adopted by manufacturers like Rolls-Royce, Jaguar, BMW, and Audi under different labels, like "Total," "Pentosin," and others.

LHM required completely different materials for the seals. Using either fluid in the incorrect system would completely destroy the hydraulic seals very quickly. To help avoid this problem, Citroën added a bright green dye to the LHM fluid and also painted all hydraulic elements bright green. The former LHS parts were painted black.

Several different hydraulic pumps were used. The DS used a seven-cylinder axial piston pump driven off two belts and delivering 175 bar of pressure. The ID19, with its simpler hydraulic system, had a single cylinder pump.

Gearbox and clutch
The mechanical aspects of the gearbox and clutch were completely conventional and the same elements were used in the ID 19.
The gear change control consisted of:
= Hydraulic gear selector.
= Clutch control. This was the most complicated part. The speed of engagement of the clutch was controlled by:
= A centrifugal regulator, sensing engine rpm and driven off the camshaft by a belt
= The position of the butterfly valve in the carburettor (i.e. the position of the accelerator)
= The brake circuit: when the brake was pressed, the engine idle speed dropped to a rpm below the clutch engagement speed, thus preventing friction while stopped in gear at traffic lights. When the brake was released, the idle speed increased to the clutch dragging speed. The car would then "creep" much like automatic transmission cars. This drop in idle throttle position also caused the car to have more engine drag when the brakes were applied even before the car slowed to the idle speed in gear, preventing the engine from "pulling" against the brakes.

Impact on Citroën brand development
The 1955 DS in one stroke cemented the Citroën brand name as an automotive innovator. In fact, the DS caused such a huge sensation that Citroën was fearful future models would not be bold enough. Other than variations on the very basic 2 cylinder economy car Citroën 2CV, like the Citroën Ami, no new models were introduced from 1955 to 1970.

The DS was a large, expensive executive car and a downward brand extension was attempted, but without result. Throughout the late 1950s and 1960s Citroën developed many new vehicles for the very large market segments between the 2CV and the DS, occupied by vehicles like the Peugeot 403, Renault 16 and Ford Cortina. None made it to production. Either they had uneconomic build costs, or were ordinary "me too" cars, not up to the company's high standard of innovation. Because Citroën was owned by Michelin as a sort of research laboratory, such experimentation was possible. Citroën finally did introduce the clever Citroën GS in 1970, which sold a spectacular 2.5 million units.

DS in the US
While the DS was a hit in Europe, it seemed rather odd in the United States. Ostensibly a luxurious car, it did not have the basic features that buyers of that era expected to find on such a vehicle - fully automatic transmission, air conditioning, power windows and a reasonably powerful engine. The DS price point was similar to the contemporary Cadillac luxury car. Also, people at the time wanted only the newest models, which changed every year, like fashion, yet the DS appeared vaguely derivative of the 1950 Hudson Hornet step-down design.

Outdated US legislation also banned one of the car's more advanced features, aerodynamic headlamps, now common in US automobiles. Ultimately, 38,000 units were sold. The first year of the aerodynamic glass over the DS' headlights along with driving lights turned by the steering, was also the first year these features were outlawed in the US.

Design variations
The DS always maintained its size and shape, with easily removable, unstressed body panels, but certain design changes did occur.

A station wagon version was introduced in 1958. It was known by various names in different markets (Break in France, Safari and Familiale in the UK, Wagon in the US, and Citroën Australia used the terms Safari and Station-Wagon). It had a steel roof to support the standard roof rack.

In September 1962, the DS was restyled with a more aerodynamically efficient nose, better ventilation and other improvements. It retained the open two headlamp appearance, but was available with an optional set of driving lights mounted on the front fenders. In 1965 a luxury upgrade kit, the DS Pallas (after Greek goddess Pallas), was introduced. This included comfort features such as better noise insulation, leather upholstery and external trim embellishments.

In 1967, the DS and ID was again restyled. This version had a more streamlined headlamp design, giving the car a notably shark-like appearance. This design had four headlights under a smooth glass canopy, and the inner set swivelled with the steering wheel. This allowed the driver to see 'around' turns, especially valuable on twisting roads driven at high speed at night.

However, this feature was not allowed in the US at the time (see World Forum for Harmonization of Vehicle Regulations), so a version with four exposed headlights that did not swivel was made for the US market.

The station wagon edition, the Break (called the ID Safari on the UK market) and "Familiale", was also upgraded. The hydraulic fluid changed in all markets (except the US) to the technically superior LHM (Liquide Hydraulique Minérale).

Rarest and most collectible of all DS variants, a convertible was offered from 1958 until 1973. The convertibles were built in small series by French carrossier Henri Chapron, for the Citroën factory. In addition, Chapron also produced a few coupés, non-works convertibles and special sedans (DS Lorraine for instance).

DS engines
As with all French cars, the DS design was impacted by the tax horsepower system, which effectively mandated very small engines.

Unlike the Traction Avant predecessor, there was no top-of-range model with a powerful six cylinder engine. The DS was designed around an air cooled flat six based on the design of the 2 cylinder engine of the 2CV, similar to the motor in the Porsche 911. Technical issues forced this idea to be scrapped.

Thus, for such a modern car, the engine of the original DS 19 was also old-fashioned. It was derived from the engine of the 11CV Traction Avant (models 11B and 11C). It was an OHV four-cylinder engine with three main bearings and dry liners, and a bore of 78 mm and a stroke of 100 mm, giving a volumetric displacement of 1911 cc. The cylinder head had been reworked; the 11C had a reverse-flow cast iron cylinder head and generated 60 hp at 3800 rpm; by contrast, the DS 19 had an aluminium cross-flow head with hemispherical combustion chambers and generated 75 hp at 4500 rpm. Apart from these details, there was very little difference between the engines: even the locations of the cylinder head studs were the same, so that it was possible to put the cylinder head of a DS on a Traction Avant engine and run it.

Like the Traction Avant, the DS had the gearbox mounted in front of the engine, with the differential in between. Thus the DS is a really a mid engine front wheel drive car. It initially had a four-speed transmission and clutch, operated by a hydraulic controller. To change gears, the driver flicked a lever behind the steering wheel to the next position and eased-up on the accelerator pedal. The hydraulic controller disengaged the clutch, engaged the nominated gear, and re-engaged the clutch. Manual transmission control was a lower-cost option. The later and simpler ID19 also had the same gearbox and clutch, manually operated. In the 1970s a five-speed manual and 3-speed fully-automatic were introduced, in addition to the original four-speed unit.

The DS and ID powerplants evolved throughout its 20 year production life. The car was underpowered and faced constant mechanical changes to boost the performance of the four-cylinder engine. The initial 1911 cc 3 main bearing engine (carried forward from the Traction Avant) of the DS 19 was replaced in 1965 with the 1985 cc 5 bearing motor of the DS 19a (called DS20 from September 1969).

The DS 21 was also introduced for model year 1965. This was a 2175 cc, 5 main bearing engine. This engine received a substantial increase in power with the introduction of Bosch electronic fuel injection for 1970, making the DS one of the first mass-market cars to use electronic fuel injection.

In 1973 saw the introduction of the 2347 cc engine of the DS 23 in both carbureted and fuel injected forms. The DS 23 with electronic fuel injection was the most powerful production model, producing 141 horsepower.

IDs and their variants went through a similar evolution, generally lagging the DS by about one year. ID models never received the DS 23 engine or fuel injection. The DS was offered with a number of transmission options, including the "Hydraulique" 4-speed semi-automatic, 4-speed and 5-speed manuals and a 3-speed Borg-Warner full-automatic. The full-automatic transmissions were intended for the US market, but as Citroën withdrew from the US in 1972, the year of highest US sales, due to constrictive road rules, most automatic DSs, being the DS 23 EFI sedans with air conditioning, were sold in Australia.

Citroen GT Concept

Citroen GT Concept




The amazing GT by CITROËN is the first ever car to be specifically designed to bring the virtual and real worlds together. The car makes its global premiere at the Paris Motor Show where visitors can actually drive the car in a true to life simulator on the Citroën stand.

The GT by CITROËN, a joint venture between Citroën and the makers of Gran Turismo, was created for the eagerly anticipated 5th game in the multi-million selling Playstation series.
At almost five metres long, GT by CITROËN packs the latest hi-tech racing equipment into an exaggerated sporty frame. Planted on 21-inch, diamond-effect, aluminium wheels, the car's gullwing doors, over-sized rear end with mobile spoiler, gaping air intakes and flat underside exude the qualities of an accomplished racer.
With chrome chevrons on the smooth, aerodynamic, front end asserting the car's Citroën identity, the GT by CITROËN is bursting with styling cues typical of the Company's creative flair. The sharp lines and sculpted body are emphasised by the white-to-grey flared paint work which gives the car a forceful look and an impression of speed - even when it's standing still.

The sleekly muscled racer sports a large wraparound windscreen adding to the impact of the car's size and dynamic appearance. Penetrating blue LED headlamps and slim-line carbon fibre rear view mirrors - which appear to be suspended in mid-air - add to GT by CITROËN's futuristic racing style.


Thr premium materials used throughout GT by CITROËN's hi-tech interior reflect the car's distinguished and refined personality.
In contrast to its light body work, the cabin features a darker, more brooding colour scheme with two padded racing seats finished in black leather and fitted with four point harnesses. The dark leather, along with copper and steel touches inside the cabin and a low-slung driving position, create an opulent and powerful racing environment. Important on-board data is displayed via a red LED head-up display, allowing drivers to maintain focus on the track.


Citroen Hypnos Concept

Citroen Hypnos Concept




B
eautifully proportioned and boldly styled, Citroën Hypnos Concept is a true hybrid in both its technology and appearance. The elegant and distinctive crossover vehicle combines the styling cues of a sporty coupé, the serene comfort of a saloon and the practical space of an SUV. At the same time Citroën Hypnos is powered by Citroën's all-new hybrid drivetrain, HYmotion4, marrying dynamic performance with solid green credentials to give 60+mpg economy despite its 200 horsepower.

The Citroën Hypnos presents an exciting vision for the future of luxury vehicles with innovative and intelligent technology such as a face-recognition system that adjusts the cabin environment to its occupant's emotions, massaging seats, thermo-sensitive ambient lighting, a faceless clock and diamond-shaped instrument clusters.

Eye-catchingly proportioned at 4.90m long, 2.17m wide and 1.58m high, Citroën Hypnos's exterior design is characterised by a tautly drawn bonnet line, raised waistline and pronounced wheel arches that house generous 22-inch wheels - a hint at the concept's sophisticated muscle power.


The deep radiant grey of the bodywork, which varies in intensity under different light environments, has an elegant and prestigious sheen, befitting the Citroën Hypnos's luxury interior. A 'pillarless' roof, appears to 'float' suggesting flowing interior space. Rear hinged back doors provide easy entry into the car's enchanting interior, whilst a cargo tailgate gives unrestricted access to the boot, adding practical functionality to underline Citroën Hypnos's SUV characteristics.

Stepping inside the cabin, passengers are welcomed into an interior embodying the magical qualities of the concept car and begin an unforgettable sensory adventure. The shimmering interior is adorned with premium materials such as leather and brushed aluminium, helping to make the Citroën Hypnos's cabin an environment of exceptional refinement and comfort. The rainbow hues, seen throughout the interior, showcase Citroën's creative flair and daring originality - the unconventional application of bright, vibrant colours in an executive vehicle.

The four morphologically-sculpted seats are made up of prism-shaped components and can be inflated and deflated to give occupants upper and lower back massages. The body-hugging seats are positioned either side of a unique central console offering occupants an astonishing amount of personal space, and arranged in a helix configuration that inspires images of a DNA strand - reflecting the Citroën Hypnos' design focus on human values.
Passengers can also customise their own space using the pivotal blades of the central helix-shaped console, which includes a range of controls such as the air-conditioning settings.


Hypnos showcases Citroën's commitment to making technology more accessible and interactive with a raft of innovative features throughout the cabin including colour therapy for passengers.
The driver's instrument cluster is seen through diamond-like prisms, mounted in metal, with each facet displaying different information. A touch screen is also incorporated into the middle of the console, and air-vents gently diffuse halos of ambient light which varies according to temperature.

A ceiling-mounted camera films the driver's face and regularly measures anthropometric data to gauge emotions and automatically adjusts the cabin lighting and fragrance accordingly for a more bespoke relaxing experience behind the wheel.
Citroën Hypnos also features a strikingly original onboard clock designed by the artist Michel Serviteur. The innovative timepiece, which has no needles or digital display, changes colour depending on the light at different times of the day and emits a succession of rhythmic colour pulses like a breathing organism.

Hypnos confirms Citroën's respect for the environment with its all-new HYmotion4 diesel hybrid drivetrain. The 4-wheel drive system combines a powerful 200bhp 2.0 HDi DPFS engine and an intelligent 6-speed EGS (Electronic Gearbox System). With the engine driving the front wheels and an axle-mounted electric motor driving the rear wheels, this simple but effective solution shows a possible way ahead for affordable hybrid technology, in line with Citroën thinking.

Capable of a 0-60mph time of around 9-seconds and silent, exhaust-free driving in ZEV (Zero Emission Vehicle) mode, the Citroën Hypnos's efficient system delivers dynamic green performance and driving pleasure with impressive fuel economy of almost 63mpg on the combined cycle and low CO2 emissions at just 120g/km.
When a burst of acceleration is required, Citroën Hypnos's boost function kicks in to deliver a combination of torque from both the combustion and electric powerplants without increasing fuel consumption.

For safe and accomplished 'green driving', Citroën Hypnos Concept is equipped with Stop & Start technology. This intelligent system also powers the electric motor when the vehicle is in 4x4 mode. For improved safety in difficult driving conditions Citroën Hypnos instinctively switches to four-wheel drive mode when faced with low grip or intense handling.
With the emphasis of the concept being on driving pleasure, Citroën Hypnos delivers a smooth and cosseted ride thanks to Citroen's legendary self-levelling suspension which combines the highest standards of passenger comfort with exceptional road manners.

Citroen Traction Avant 11B Cabrio

Citroën Traction Avant



The Citroën Traction Avant was an automobile produced by the French manufacturer Citroën. About 760,000 units were manufactured from 1934 to 1957.
The Traction Avant, designed by André Lefèbvre and Flaminio Bertoni in late 1933 / early 1934, was the first front wheel drive car in large scale production. Cord had built front wheel drive vehicles a few years earlier in limited quantities at high prices.

The car introduced the use of an arc-welded monocoque frame, where other cars of the era were based on a frame onto which the body ("coachwork") was built. Monocoque construction results in a lighter vehicle, and is now used for virtually all car construction, although body-on-frame construction is still suitable for larger vehicles such as trucks.
This method of construction was viewed with great suspicion in many quarters, with doubts about its strength. A type of crash test was developed, taking the form of driving the car off a cliff, to illustrate its great inherent resilience.
The novel design made the car seem very low-slung relative to its contemporaries — the Traction Avant always possessed a unique look, which went from appearing rakish in 1934 to familiar and somewhat old fashioned by 1955.

The suspension was very advanced for the car's era. The front wheels were independently sprung, using a torsion bar and wishbone suspension arrangement, where most contemporaries used live axle and cart-type leaf spring designs. The rear suspension was a simple steel beam axle and Panhard rod with unequal trailing arms, to allow the two torsion bars to run parallel to each other, across the car's width.

Since it was considerably lighter than "conventional" designs of the era, it was capable of 100 km/h (62 mph), very fast for the era, and using only 10 litres of gasoline per 100 km (24 mpg).

The original models were a small saloon with a 1303 cc engine. This model was called the 7A, which was succeeded in June 1934 by the 7B and 7C with higher powered engines of 1529 and 1628 cc respectively. Later models were the 11, which had a four-cylinder 1911 cc engine, and the 15, which had a 2867 cc six-cylinder engine. The numbers refer to the French fiscal tax horsepower rating CV (thus the 11 was an 11CV, the 15 was 15 CV). The 11 was built in two versions, the 11L ("légère", or "light"), which was the same size as the 7CV, and the normal model 11, which had a longer wheelbase.
Citroën planned two variants that never entered production, since there was not enough funding available to develop them, except as running prototype vehicles. One was an automatic transmission-equipped model and the other was a 22CV model with a large V8 engine.

In addition to the 4-door body, the car was also produced as a 2-door coupé with a rumble seat, as a convertible and as an extended length model with three rows of seats. There was even a hatchback-type Commerciale variant, in 1939, well ahead of its time, in which the tailgate was in two halves, the lower of which carried the spare wheel with the upper opening up to roof level. A one-piece top-hinged tailgate was introduced when the Commerciale resumed production in 1954 after being suspended during World War II.

The Traction Avant used a longitudinal, front wheel drive layout, with the transmission ahead of the differential and front axle, and the engine behind it, resulting in a very favorable location for the center of gravity of the vehicle, aiding the car's advanced handling characteristics. This layout was later carried forward to the Citroën DS and Citroën SM. The gear change was set in the dashboard, with the lever protruding through a vertical, H-shaped gate. Because this vertical orientation could have resulted in the car dropping out of gear when the lever was in the upper positions (i.e. second or reverse gears), the gear shift mechanism was locked when the mechanical clutch was engaged and released when the clutch pedal was depressed. The result of this layout, along with pendant pedals, umbrella-type handbrake control and front bench seats, was a very spacious interior, with a flat and unobstructed floor.

Left-hand drive versions were built in Paris, France and Forest, Belgium, and right-hand drive cars were built in Slough, United Kingdom. The Slough verson of the 11L was called the Light Fifteen and the long wheelbase 11 was called the Big Fifteen. This confusing terminology referred to the British fiscal tax rating of the time, which was higher than the French, so the 11CV engine was 15HP in England. The 15CV model was called "Big Six" in reference to its 6 cylinder engine. They were equipped with the leather seats and wooden dashboards popular in the UK, had a 12-volt electrical system and were distinguished by a different radiator grille and different bumpers (fenders). Some models also had a sliding sunroof.

Impact on Citroën
The development costs of the Traction Avant were very high and Citroën declared bankruptcy in 1934. The largest creditor was Michelin, who then owned Citroën from 1934 until 1976. Under Michelin, Citroën was run as a research laboratory, a test bed for their radial tires and new automotive technologies.

In 1954 Citroën's experiments with hydropneumatic technology produced its first result, the "15H"—a variant of the 6-cylinder model 15 with a self-leveling, height-adjustable rear suspension, a field trial for the revolutionary DS released the following year.

Production of the Traction Avant ended in July 1957; over 23 years, 759,111 were built, including 26,400 assembled in Slough (GB), 31,750 assembled in Forest (Belgium) and 1,823 assembled at Köln in Germany. The total reflects the production stoppage during World War II.

Tuesday, July 7, 2009

Citroen C3

The new Citroën C3 has a strong ambition: to replace a bestseller that has sold more than 2 million units.
The winning formula: take the best of the Citroën C3 and make it even better.
With seductive features: tauter styling, high-class trim, intelligent architecture creating exceptional interior space in what is still one of the most compact vehicles on the market, and superior on-board comfort and road handling, both in the city and on the open road. With the most advanced features in the segment, the new Citroën C3 will be ideal as the main family car or core fleet vehicle.

The Zenith windscreen makes the new Citroën C3 unique. As well as drenching the cabin in light and expanding visibility, this windscreen introduces passengers of our Visiodrive to a new driving experience. "With the new C3, Citroën is opening up a new automobile universe. A universe where reason and responsibility leave room for new driving pleasure. And new sensations," says Vincent Besson, Products and Markets, Citroën.

Made in France, on the industrial sites of Aulnay and Poissy, the new vehicle meets high quality standards, both new and over time. To guarantee optimum reliability, and iron out the last imperfections, it will be put through more than 2 million kilometers of on-road testing before the market release.

A Unique, Alluring Personality
The new Citroën C3 is asserting its personality. The recognizable protective roundness of its predecessor is given a sportier edge with tauter, smoother lines. Exciting with a gentle touch: the essence of seduction.

The styling and refinement of the new Citroën C3 are seductive. The materials are high class, such as the thermo-coated dash, highlighted by a cross strip in satin gray or gloss brushed aluminium, and chrome detailing. The new C3 takes trim level and quality to a new dimension. This is illustrated perfectly by care with gap and flush, attention to every detail and robust design.

The Intelligent Architecture
The new Citroën C3 is one of the most compact vehicles in its segment. With a length of 3.94 m, a width of 1.71 m and a 10.2 m turning circle, it is perfect for the city. A compact exterior, without compromising on interior space. The new Citroën C3 has the roominess it needs to assert its new status as the main family car or core fleet vehicle. This can been seen in the generous 300 liters of optimized boot capacity, numerous storage spaces (console, glovebox, central armrest…), medium-height seats facilitating access and visibility, and optimized interior space offering more knee room. The new Citroën C3 is more spacious, but still compact. It's a "real" car, with upper-segment features.

A New Driving Experience
The new experience goes further and gets better with the Zenith windscreen, a technological feat. This exceptionally long windscreen expands the front occupants' field of vision by 80° upwards. Combined with slimmer pillars, the Zenith gives all occupants a sense of unlimited, high-definition vision. Total immersion. As a world first, the progressive glass smooths the transition from the strong sun protection above the front passengers to the standard clear glass for looking forwards. The saloon with the biggest windscreen and the smallest roof on the market delivers more new driving sensations! The new Citroën C3 offers more visibility and light, for more safety and driving pleasure.

The new Citroën C3 is a "connected" car. In addition to the RD4 mp3 audio system, the USB Box (USB slot + jack, full iPod compatibility, Bluetooth® hands-free kit) and MyWay navigation, the new Hifi System® surrounds passengers with sound, as if they were in a concert hall. The system offers not only exceptional sound quality, but comes with a competitive price tag.

The Impressive and Reasonable Dynamic Features
The new Citroën C3 will make others green with envy… with more dynamic road handling, it is as comfortable on the open road as in the city, and has managed to keep a slim figure by not putting on any weight! An exceptional achievement given the convincing increase in comfort and interior space. This weight control, combined with optimized aerodynamics (a Cx of 0.30), the new C3 manages its fuel consumption and CO2 emissions intelligently. Right from launch, it will come in a version emitting 99 g/km of CO2, with the HDi 90 DPFS engine.